第五章 Some Basic MS-DOS Commands一些基本的MS-DOS命令
第十四课 Format格式化命令
1.For the most part, you will use the Format command to prepare floppy disks.
在多数情况下,你将用Format 命令处理软盘。
2.When you perform a sample format of a floppy disk, MS-DOS formats the disk for the drive's standard capacity——1.2MB in a 1.2-MB drive, 720 KB in a 720-KB, and so on.
当你对一张软盘进行简单格式化时,MS-DOS将它按驱动标准容量进行格式化,即1.2MB驱动器上格式化成1.2MB,720KB驱动器上将式化为720KB等等。
3.If the current drive is C and you want to formal a disk in drive A, type:C:\>format a:
如果当前驱动器是C,而你要在A驱动器上格式化一张盘,敲入C:\>format a:
New Words & Terms
will 将(构成将来时)
prepare 准备
perform 执行,完成
simple 简单的
current 当前的
附:Format 命令的有关屏幕提示
1.If you specify a hard disk:
WARNING, ALL DATA ON NON - REMOVABLE DISK DRIVE x:
WILL BE LOST
Proceed with Format (Y/N)?
如指定对硬盘格式化:
警告,所有x驱动器上不可移动盘上的资料将会丢失。
要不要进行格式化 (Y/N)?
2.If you are formatting a floppy disk:
Insert new diskette for drive A:
and press ENTER when read...
如果正格式化一张软盘:在A驱插上新盘,插好后敲ENTER 键…
3.If the disk is new: Formatting 1.2M
如果磁盘是新的:格式化成1.2M
4.Once the format begins, you see a status report telling you xx percent completed (xx is a number). When the disk is formatted, the report becomes.
Format complete Volume label (11 characters, ENTER for none)?
一旦格式化开始,你便可看到状态报告。告诉你百分之多少完成(xx 表示数目)。当格式化完成,就报告完成了。卷标(11个字符,敲ENTER键表示不设卷标)
New Words & Terms
warning 警告
data 资料 (datum 的复数)
non-removable 不可移动的
lost (lose 的过去分词)丢掉
proceed ~ with... 继续进行……
diskette 软盘(=floppy disk)
ready 准备好的
once 一旦
status 状态
report 报告
tell 告诉
percent 百分之……
complete 完成
volume 卷
label 标签;标号
none 没人;没什么
Exercises
1.如果你在DOS提示符C:\>下直接要它执行format命令会发生什么?
2.如果你要在B驱动器上格式化一张软盘,其命令应该是什么?
3.如果A驱的标准容量确定为1.2MB,可以格式化一张360KB的低密盘吗?
4.认识以下短语:
the Format command, the current drive; insert a disketter for drive A; volume label